6 Components and operator's controls
100_0202_cp_0006.fm
22
Display
The following information is displayed in sequence:
Number of operating hours.
The transmission channel set on the machine.
Error statuses.
Diagnostic menu.
Configuration menu.
Diagnostic menu
In the diagnostic menu on the display, the following information about the machine can be accessed:
Overview of all detected errors (error memory).
Starter battery voltage.
Coolant temperature of the engine.
Hydraulic oil temperature.
Engine speed.
Software version (SW version).
Switch test.
IR transfer
Configuration menu
In the configuration menu on the display, the following machine settings can be adjusted:
Change setup PIN.
Change/activate/deactivate activation PIN of the machine.
Setting turn-off time of the machine.
Select the display language (English, German, French, or Spanish).
Adjust machine response in the case of overload (overload sensor).
Setting the hydraulic parameters/centrifugal force.
NOTE
The operation of the configuration menu is described in the manual for machine
configuration.
Diagnostics
Setup
