Wacker Neuson BH23, Operator'S Manual

Page: 40 / 68

11 Maintenance
40
11.3 Maintenance schedule
11.4 Maintenance work
Working in the workshop
Perform maintenance work in a workshop on a workbench. This has the following
benefits:
„
Protection of the machine of contamination on the construction site.
„
A level and clean work surface makes work easier.
„
There is a better overview over small parts and they are not lost as easily.
11.4.1 Cleaning machine
Clean the machine after use.
1. Clean the ventilation slots with a suitable tool.
2. Wipe the housing with a damp and clean cloth.
Task Daily be-
fore oper-
ation Every
20 hrs. Monthly Annually
Visual inspection of all parts
for damage.
„
Clean the machine.
„
Ventilation slots.
„
Air cleaner.
„
Check the fuel:
„
Fuel tank fill level.
„
Fuel tank for leaks.
„
Lines for leaks.
„
Check the tool ends and cut-
ting edges – if required,
sharpen, reforge or replace.
„
Lubricate the machine.
„
Clean spark plug – change, if
necessary.
„
Check tool holder for wear –
have it changed, if
necessary. *
* Have these tasks carried out by the service department of your Wacker Neuson con-
tact person.
„
Have the fuel filter replaced. *
„