SDB-103 Small Diameter Beveler and FF 206 Flange Facer
2
Part No. 16-MAN-01, Rev. 4-1109
E.H. Wachs
S
YMBOLS
AND
W
ARNINGS
The following symbols are used throughout this manual to
indicate special notes and warnings. They appear in the out-
side column of the page, next to the section they refer to.
Make sure you understand what each symbol means, and
follow all instructions for cautions and warnings.
A WARNING alert with the
safety alert symbol indicates
a potentially hazardous situa-
tion that
could
result in
seri-
ous injury or death
.
A CAUTION alert with the
safety alert symbol indicates
a potentially hazardous situa-
tion that
could
result in
minor or moderate injury
.
A CAUTION alert with the
damage alert symbol indi-
cates a situation that
will
result in
damage to the
equipment
.
An IMPORTANT alert with
the damage alert symbol indi-
cates a situation that
may
result in
damage to the
equipment
.
WARNING
This is the
safety alert symbol
. It is used
to alert you to
potential personal injury
hazards
. Obey all safety messages that
follow this symbol to avoid possible
injury or death.
CAUTION
CAUTION
This is the
equipment damage alert
symbol
. It is used to alert you to
poten-
tial equipment damage situations
.
Obey all messages that follow this sym-
bol to avoid damaging the equipment or
workpiece on which it is operating.
IMPORTANT