Wachs SDB-103, User Manual, Page: 52 / 90

SDB-103 Small Diameter Beveler and FF 206 Flange Facer
48 Part No. 16-MAN-01, Rev. 4-1109 E.H. Wachs
5.
Remove the alignment fixture. The mandrel and
machine are now square to the flange face.
Squaring the FF 206 on Unsquare Flange
If the elbow or bend is not square, establish a reference
point for squaring, and then square the machine to that point
using the procedure detailed above.
Mounting the FF 206
1.
Slide the machine housing over the threaded end of
the mandrel.
Figure 5-36. Install the configured FF 206 onto the
mandrel.
2.
Turn the feed handle clockwise to engage the mandrel
threads.