SDB-103 Small Diameter Beveler and FF 206 Flange Facer
16
Part No. 16-MAN-01, Rev. 4-1109
E.H. Wachs
S
PECIFICATIONS
O
PERATING
E
NVELOPE
The following drawings illustrate the overall dimensions
and operating envelopes for the SDB 103 with air and elec-
tric motors, and for the FF 206.
Machine capacity
SDB 103: Pipe and tube 0.875” (22.2 mm)
I.D. to 4.5” (114 mm) O.D.
FF 206: Flange O.D. from 2.0” (51 mm) to
6.0” (152 mm).
Machining functions
(SDB 103)
Facing, O.D. beveling, compound beveling,
J prepping, and I.D. counterboring of open-
end pipe and tube. Use up to four tools
simultaneously.
Machining functions
(FF 206)
Single-point finishing of flat and raised
flange faces. Surface finishes include 500
RMS (record groove), 250 RMS, 125 RMS,
and 63 RMS.
Mounting mechanism
I.D.-mounted mandrel with adjustable
clamping legs and multiple legs sets to
cover full I.D. range. Standard diameter,
small I.D., and independent fitting (short
clearance) mandrels available.
Drive motors
Air motor, 110 V or 220 V electric motor
Air requirements
16-000-01: 35 cfm (991 l/min)
Electrical requirements
16-000-02: 110 VAC, 50-60 Hz, 8.0 A
16-000-03: 220 VAC 50-60 Hz, 4.6 A
Controls
Manual clamping, manual axial feed, vari-
able speed control (air or electric). FF 206:
mechanical radial feed using starwheel/trip
mechanism.
Feed features
2.5” (63.5 mm) maximum axial feed;
0.0625” (1.59 mm) feed per handle revolu-
tion. Indexed feed dial for precise depth.
Tooling
Standard Wachs form tools for facing, bev-
eling, and counterboring. Single-point
holder with inserts for FF 206 flange facing.
High speed steel or carbide. Custom tool-
ing available.
Dimensions and weights
See operating envelope drawings in next
section.