Chapter 6, Routine Maintenance: Lubrication
E.H. Wachs
Part No. 16-MAN-01, Rev. 4-1109
57
L
UBRICATION
1.
The bore of the cutting head, feed nut, and mandrel
must be kept clean and oiled.
2.
Fill the air treatment module with motor oil or anti-
freeze motor oil.
Figure 6-2. Apply air motor oil to the air motor daily.
3.
Every 40 hours of operation, flush the air motor with a
solution of three parts cleaning solvent and one part
air motor oil. Afterwards, add 1 oz. of air motor oil
into the air line and run the air motor for one minute.
4.
The components of the mandrel, including the draw-
bar and clamp legs, should be cleaned and oiled every
day of use.
