Chapter 5, Operating Instructions: Mounting the SDB 103
E.H. Wachs
Part No. 16-MAN-01, Rev. 4-1109
33
2.
Put the squaring plate over the shaft of the mandrel
and slide it against the head. Pull the mandrel back in
the pipe if necessary.
Figure 5-13. Put the squaring plate onto the mandrel.
3.
Tighten the set screws in the squaring plate to secure it
to the mandrel.
Figure 5-14. Tighten both set screws in the squaring
plate to secure and center it to the mandrel.
