Chapter 5, Operating Instructions: Setting Up the SDB 103
E.H. Wachs
Part No. 16-MAN-01, Rev. 4-1109
25
Figure 5-3. Turn the feed handle to thread the man-
drel into the machine body
4.
Install the draw bar nut, and then install and tighten
the collar nut. The collar nut captivates the draw bar
nut so the draw bar nut can be turned to expand and
contract the mandrel legs.
Figure 5-4. Tighten the collar nut with finger pressure
to captivate the draw bar nut on the mandrel.
NOTE
The drawbar nut
and the collar nut must be
removed to remove the
mandrel from the machine
body.
