Functions
• 2 channel balanced inputs and 4 channel balanced outputs for 2 x 4 processor.
• 3 channel balanced inputs and 6 channel balanced outputs for 3 x 6 processor.
• 4 channel balanced inputs and 8 channel balanced outputs for 4 x 8 processor.
• 24-bit and 48kHz sampling rate, ∑ - ∆ AD/AC convertor, 32-bit DSP chip.
• Input processors; Gain, mute, noise gate, high/low cut, 8 parameter EQ, Phase and delay.
• Output processors; Crossover, 5 parameter EQ, gain, mute, compressor/limiter and delay.
• Flexible matrix assignments on every input and output channel.
• Adjustable PEQ frequency, gain and bandwidth with selectable types;
(PEAK, H-SHELVE and L-SHELVE).
• Selectable styles of high/low-cut filters;
Butterworth, Linkwitz-Riley, Bessel; slope choice is from -6dB/0ct - -48dB.0ct.
• Adjustable compressor/limiter value, rate, start-up and resume times.
• Adjustable start-up and resume times of all noise gates.
• Easy parameter copying
• Signal test with selectable pink or white noise, with 20kHz -20kHz adjustable
sine wave and signal range.
• 2 x 20 character LCD display screen with push buttons for easy and quick selection.
• 32 user presets; every preset can be saved and adjusted separately with code protection.
• Can be controlled with PC via a USB and RS-232 connector.
Front Panel
1)
Input level indicators:
5 precision LEDs show the amount of input level on each channel
2)
Mute button:
Mutes the selected input channel.
3)
Edit button:
Edits the parameters of the selected input channel.
4)
Parameter buttons:
Enters the systems menu and in/output channel
parameter functions.
5)
LCD display:
Shows the status of the current mode.
6)
Parameter button:
Edits the menu and parameter presets.
7) 4 precision LEDs and 1 signal LED shows the current state of the output level on each of the
channels.
8)
Mute button:
Mutes the selected output channel.
9)
Edit button:
Edits the parameters of the selected output channel.
10)
USB connector
: Use this USB connection to connect to the PC and control equipment.
4
