10
PC SETUP
8)
Now click the
“ONLINE”
tab in the
top bar of the window. An
“ID select”
window
should now appear (see the image on the
right). Make the ID number the same as the
hardware device and click OK.
Note” All of the device’s ID’s are “1”.
9)
The software will now do an auto search for
the connected device. When prompted click
OK.
10)
It will now show a
“RED”
status bar at the
bottom of the window when the software has
connected successfully.
To exit the software, you need to click on the
“ONLINE”
tab first before you
disconnect the USB cable or shut down
the device.
