7
PC SETUP
NOTE: This software is only compatible with WINDOWS XP.
The operation instructions, USB drive and PC software are all included on the CD.
1)
After you have inserted the software installation disc into your PC, double click on the
“CDM 2. 04.16.exe”
file. The image below will be displayed on your screen during this process.
2)
Once the driver has been installed, double click on the
“PC software”
on the CD and click
“NEXT STEP”
to continue. This will now carry on until the instruction
“finishing setup”
appears.
When it has finished installing the software you can then exit.
3)
Now connect the unit to the PC using the supplied USB cable. After turning on the unit your PC
will automatically update the hardware. During setting up the hardware, there will be a couple of
pop-up warnings;
“FOUND NEW HARDWARE”
and
“HARDWARE SETUP SUCCESS AND CAN BE USED”.
