56
12.4 CONNECTING THE EXTERNAL USB CARD READER TO YOUR PC/MAC
To connect the USB reader to your PC/MAC, follow these steps:
-
Start the PC/MAC
-
Connect the USB reader to a free USB port on your computer.
NOTE 1
Most operating systems recognize the USB reader and install the device automatically. In
some cases the operating system asks for the installation disk. To complete the installation
follow the messages on your computer screen. For further information refer to the instruc-
tions supplied with the USB reader.
NOTE 2
If the computer is connected to a network system it is possible that the USB reader drive is
not visible on your computer even after correct installation. In this case consult your network
administrator or assign a different drive letter to the USB reader.
Once the installation is completed and a memory card with cycle data is inserted into the external card
reader, data can be saved, copied and organized on your PC/MAC.
12.5 SAVED FILE
The sterilization report is saved in a file with a HTM extension. It can be opened, viewed and printed with a
HMTL viewer (e.g., *Microsoft Internet Explorer).
* Brands and products are trademarks of the manufacturers
12.6 CONTROL CODE
Saved files contain a control code for proper identification. Any manipulation of a file will change the code
and compromise the integrity of the saved data. W&H Sterilization will not take responsibility for any mani-
pulated cycle data.
12.7 FILE NAMES
Each cycle report is saved as a file in a HTM format. File names are generated automatically.
Example of a file name:
01898 28-01-06 08_41_22 B&D _ HELIX LISA 517 02-0005.htm
saving format depends on the Date-Clock setting (see § 6.1.10 and 6.1.11)
12.8 DIRECTORY NAME
Files are saved on the memory card in the following structure:
LISA 517 02-0005
∟
2006-01
∟
01898 28-01-06 08_41_22 B&D _ HELIX LISA 517 02-0005.htm
Summary of Contents for Lisa
Page 1: ...Instruction for use UM009ENG LISA FULLY AUTOMATIC 201 10 Rev 4...
Page 2: ......
Page 77: ......
