W & H Lisa, Instructions For Use Manual

Page: 43 / 78

39
7.1.1 Starting a sterilization cycle
Exit from sleep mode by pressing the
"Sleep mode" icon.
Select a cycle by pressing the "Cycle selection"
icon and confirm the selection by pressing the "Se-
lection confirmation" icon.
Once a cycle is selected and confirmed, the following screen informs about the maximum load weight lim-
its that can be processed with the selected cycle (see cycle table § 7.1 for further information).
Press the "Start cycle" icon to initiate the selected cycle.
NOTE:
If the “user authentication” option is activated, the user will be asked to identify
themselves before starting the cycle.
If the password protection is activated as well, a password will be requested.
See §6.11 for further details.
7.1.2 ECO-Dry feature
The ECO-Dry feature is active whenever you initiate a sterilization cycle. The feature is designed to always
automatically provide you with the shortest possible cycle times always, while assuring that any load
placed in the sterilizer will be perfectly dry at the end of the cycle. The on-board sterilizer computer is able
to determine the amount of the load you placed in the sterilizer chamber and will automatically adjust the
cycle drying time to that specific load. That means the smaller the load, the faster the cycle, thus eliminat-
ing the need for selecting a quick or a flash cycle. Place loads of 500 grams or less (e.g., up to 8 wrapped
dental handpieces) to benefit from the shortest cycle time of just over 20 minutes. This feature helps you to
save time, energy and money, and works fully automatic.
NOTE:
To enjoy the full benefit of short cycle times when placing small loads, always place the
load on the upper tray of the chamber rack and remove all other trays from the chamber.
Ensure that the paper side of sterilization bags faces up.
Enter sleep mode
Menu
option
Exit sleep mode
Confirm selection
Cycle selection
Return to
previous menu
Start cycle