Vysk QS1, Training& Technical Support

Page: 19 / 90

•
To place the QS1 into deep-sleep mode, ensure that the Lockdown
switch is disengaged and press the lower right-hand button on the
rear of the case three consecutive times within five seconds.
•
Successful initiation of deep-sleep mode is indicated by the V-Y-S-K
lights flashing three consecutive times.
•
Deep-sleep mode is recommended only for situations in which the QS1
is going to be stored without an accompanying phone or charger for
extended periods of time.
•
The case will NOT receive calls or notifications in this mode.
•
To return to active mode, push either button on the rear of the case or
slide the lockdown switch. The phone will also wake from deep-sleep
if the charging cable is inserted.
•
Return to active mode will be indicated by scrolling V-Y-S-K lights.
DEEP-SLEEP MODE