17
correctly
1/ Water needs to be very close to top to activate switch.
Hand fill to top to confirm switch has been moved.
Unit is smoking – Out of box
This is not an uncommon occurrence when first operating
new units. Put unit under vent and run at full power for
one hour. – smoking is normal during first cycle to
temperature.
Contamination in chamber
1/ See cleaning procedure, section 2.5.
2/ Develop and follow standard operating procedure for
specific application; include definition of cleaning
technique and maintenance schedule.
Contamination in sample
1/ See “Contamination in chamber”
2/ Protect open samples from areas of maximum air
current near top center of chamber.
The incubator is designed so that no internal electrical servicing should be required
under normal conditions. If electrical servicing is necessary, it should be performed by
qualified service personnel. For information on where to contact Customer Service,
please see the manual cover.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
