12
MAINTENANCE
Note: prior to any maintenance or service on this unit, disconnect the service
cord from the power supply.
6.1 Cleaning:
Cleaning and decontamination are recommended on a regular basis.
To prepare the incubator for cleaning remove all parts such as the shelf
standards and humidity pan. All stainless steel parts are autoclavable. Please
review section 2.5 for further instruction.
6.2
Check water level in the water jacket and in the chamber humidity pan frequently.
Replenish water in the water jacket as needed.
6.3 Storage:
If the incubator is to be turned off for any length of time, dry the
chamber and humidity pan thoroughly and leave at room temperature. Failure to
do this may cause the interior to become contaminated. No adjustment to
controls should be required when restarting the unit. If the unit is to be
transported, disconnect the power supply, drain the water jacket (See Filling and
Draining Section 2.6) turn the leveling feet in all the way to prevent damage and
follow instructions in Section 2.3, Lifting and Handling.
6.4
There is No maintenance required on electrical components. If the incubator fails
to operate as specified review Section 7 Troubleshooting, prior to calling
customer service.
Section
6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
