5
level and solid without rocking. If the unit must be moved, turn the leveling feet all
the way clockwise to prevent damage while moving.
2.5 Cleaning:
The unit chamber should be cleaned and disinfected prior to use. Your
operating conditions and appropriate protocol will determine the correct procedure
for decontamination. A typical decontamination procedure that is adequate for
many situations has been described below. As well, certain steps are listed that
will help reduce the likelihood of contamination and the necessity of
decontamination. Whatever process is appropriate, it needs to be done on a
regularly scheduled basis. Depending on usage and protocol, this may be
monthly, quarterly or otherwise. Regardless of the decontamination procedure
used, certain precautions will need to be taken:
A.
Always disconnect the unit from the electrical service when cleaning.
Assure all volatile or flammable cleaners are evaporated and dry before
reconnecting the unit to the power supply.
B.
Special care should be taken when cleaning around sensing heads to
prevent damage.
C.
If you use chlorine-based bleaches or abrasive cleaners this will modify the
stainless steel interior finish. DO NOT USE hard tools such as metal wire
brushes or steel wool. Use non-abrasive cleaners and soft tools such as
plastic brushes.
D.
Use only DISTILLED water in the water jacket and the humidity pan. DO
NOT USE de-ionized water due to its reactivity with metal components.
TYPICAL DECONTAMINATION PROCEDURE
1.
Remove the humidity pan every week and autoclave, or wash with soap
and water then disinfect with 70% alcohol solution. Replace in the
incubator with fresh, DISTILLED water.
2.
Remove the inner door gasket, clean and disinfect. Clean and disinfect all
mounting grooves for the door gasket.
3.
Remove all shelves, shelf supports, shelf standards and shields. Autoclave,
or wash and disinfect as described in item 1.
4.
Wash and disinfect all interior surfaces.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com