VULCAN SNORKEL™ GAS CONVECTION OVEN
INSTALLATION, SERVICE and PARTS MANUAL INDEX
Vulcan Snorkel™ is produced with the best possible
workmanship and material. Proper usage and
maintenance will result in many years of satisfactory
performance.
The manufacturer suggests that you thoroughly read this
entire manual and carefully follow all of the instructions
provided.
DESCRIPTION
PAGE
DEFINITIONS OF PERSONNEL (Operating, Installation and Service)
and SHIPPING DAMAGE CLAIM PROCEDURES
(Inside Front Cover)
CAUTIONS
114594-1 & 2
INDEX
114594-3
GENERAL THEORY OF OPERATION
114594-4
INSTALLATION INSTRUCTIONS
114594-5
SG-2SMT & SG-10SMT ADD-A-SECTION INSTRUCTIONS
114594-5 thru 11
INSTALLATION INSTRUCTIONS (Continued)
114594-12 thru 14
FLUE CONNECTIONS
114594-15
TROUBLE SHOOTING SERVICE
114594-15 & 16
PARTS DESCRIPTION & REPLACEMENT
114594-17 thru 19
POWER PANEL - PARTS REPLACEMENT
114594-20
PRESSURE REG. - PILOT ADJ. - ORIFICE DATA
114594-2
COOKING CHART
114594-22 & 23
REPLACEMENT PARTS LIST
114594-24 thru 44
REVISION PAGE
(Inside Back Cover)
The rating plate stating the model number, serial
number, gas type, voltage and amperage is located
inside the lower front cover of the unit on the right hand
side.
Motors in Vulcan convection ovens are permanently
lubricated and require no additional maintenance.
WARNING:
Back and sides of unit must be installed 6"
from combustible construction.
The vent of this appliance should be checked every 6
months for restrictions.
A complete set of wiring diagrams are packed
separately in the unit.
A wiring decal is located inside the control panel
compartment.
5