Fig. 42
6.
Reverse procedure to install the replacement
window.
INTERIOR LIGHTS (Rear Mounted,
Round)
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
Lamp
1.
Remove racks.
2.
Unscrew glass lens for the light being replaced
then unscrew bulb.
NOTE:
Use a cloth when handling bulb so you do not
leave fingerprints on bulb.
Fig. 43
3.
Replace bulb then reverse procedure to install.
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
Lamp Assembly
1.
Remove lens and bulb.
2.
Remove springs from retaining tabs (2 places) on
the socket.
Fig. 44
3.
Depress retaining tabs and pull socket out from
the oven, far enough to disconnect lead wires.
4.
Remove socket from the oven.
5.
Attach lead wires to the replacement socket.
6.
Insert socket into the hole in oven and push until
socket is held in place by retaining tabs.
7.
Install light bulb and lens.
8.
Check for proper operation.
INTERIOR LIGHTS (Side Mounted,
Square)
Bulb Replacement
SG4 & SG6 Series Full Size Gas Convection Ovens - REMOVAL AND REPLACEMENT OF PARTS
Page 21 of 56
F35626 Rev. B (1118)
