Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
1.
Remove the screws that attach roller latch
assembly to door.
2.
Reverse procedure to install.
Fig. 39
DOOR CATCH ROLLER ASSEMBLY
(INDEPENDENT DOORS)
NOTE:
For units with serial number starting with 48
made before 8/13/07 and serial number starting with
54 made before 8/27/07.
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
1.
Remove the top front cover as outlined under
COVERS AND PANELS.
2.
Remove the nuts and bolts that secure the door
catch assembly.
Fig. 40
3.
Reverse the procedure to install.
4.
Adjust the roller catch as outlined under the Door
Catch Adjustment in Service Procedures and
Adjustments.
DOOR WINDOW
Disconnect the electrical power to
the machine and follow lockout /
tagout procedures.
1.
Remove the screws at the top and bottom of the
door.
Fig. 41
2.
Remove the door handle, then remove the outer
door panel.
3.
Lift out the inner door panel window assembly.
4.
Remove the door seal from the inside of the left
door only.
5.
Remove the screws securing the window tabs to
the door bracket and lift the window assembly out
from the door frame.
SG4 & SG6 Series Full Size Gas Convection Ovens - REMOVAL AND REPLACEMENT OF PARTS
F35626 Rev. B (1118)
Page 20 of 56
