www.vtiinstruments.com
EX1629 Command Set
93
S
ECTION
7
F
UNCTION
C
ALLS
I
NTRODUCTION
This section presents the instrument function set. It begins by listing the APIs according to
function and is then followed by an alphabetical listing. With each function is a brief description.
The remainder of this section is devoted to describing each function in detail. Each function entry
provides the function prototype, the use and range of parameters, and a description of the
function’s purpose.
F
UNCTION
R
ETURN
V
ALUE
Each function will return a status that will contain either VI_SUCCESS or an error status returned
by the function call. Refer to the Error Messages section found later in the chapter for possible
error codes. If the vtex1629_error_message function call is used, it will return a description of the
error code returned by the last function call made.
F
UNCTION
T
REE
The function set for the EX1629 has been categorized according to function and is presented
below.
Initialize
Initialize
Limit Checking
Set Bridge Limit Enabled
vtex1629_set_bridge_limit_enabled
Get Bridge Limit Enabled
vtex1629_get_bridge_limit_enabled
Set Bridge Limit
Get Bridge Limit
Set Confidence Reporting Mode
vtex1629_set_confidence_reporting_mode
Get Confidence Reporting Mode
vtex1629_get_confidence_reporting_mode
Set Confidence Limit
Get Confidence Limit
Set LXI Limit Event
vtex1629_set_lxi_limit_event_enabled
Get LXI Limit Event
vtex1629_get_lxi_limit_event_enabled
Set LXI Limit Event Latch
vtex1629_set_lxi_limit_event_latch
Get LXI Limit Event Latch
vtex1629_get_lxi_limit_event_latch
Configuration Calls
Store Current Configuration
Load Stored Configuration
Clear Stored Configuration
Get Current Configuration Digest
vtex1629_get_current_config_digest
Get Stored Configuration Digest
vtex1629_get_stored_config_digest
Compare Digests