VTech VT 2960 User Manual Download | Manualshive

Page: 42 / 48

background image

42

This equipment complies with Parts 15
and 68 of the Federal Communications
Commission (FCC) rules for the United
States. It also complies with Industry
Canada (IC) rules RSS210 and CS-03 for
Canada.

A label is located on the underside of the
Base Unit containing either the FCC reg-
istration number and Ringer Equivalence
Number (REN). You must, upon request,
provide this information to your local tel-
ephone company.

This equipment is compatible with in-
ductively coupled hearing aids.

Should you experience trouble with this
telephone equipment, please contact:

In the United States:

VTECH COMMUNICATIONS

1-800-595-9511

IN CANADA:

VTECH ELECTRONICS

1-800-267-7377

for repair/warranty information. The tel-
ephone company may ask you to dis-
connect this equipment from the line
network until the problem has been cor-
rected.

Your

VT 2960 is designed to operate at

the maximum power allowed by the FCC
and IC. This means your Handset and
Base Unit can communicate only over a
certain distance - which will depend on the
location of the Base Unit and Handset,
weather, and the construction and layout
of your home or office.

FCC AND IC REGULATIONS

FCC Part 15

Warning: Changes or modifications
to this unit not expressly approved by
the party responsible for compliance’s
could void the user’s authority to op-
erate the equipment.

The equipment has been tested and found
to comply with part 15 of the FCC rules.
These limits are designed to provide rea-
sonable protection against harmful inter-
ference in a residential installation. This
equipment generates, uses and can radi-
ate radio frequency energy and, if not in-
stalled and used in accordance with the
instructions, may cause harmful interfer-
ence to radio communications. However,
there is no guarantee that interference will
not occur in a particular installation. If this
equipment does cause harmful interfer-
ence to radio or television reception, which
can be determined by turning the equip-
ment off and on, the user is encouraged
to try and correct the interference by one
or more of the following measures:
- Re-orientate or relocate the receiving
antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet or
on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.

«
...
40
41
42
43
44
...
»

Summary of Contents for VT 2960

















































Reviews:

No comments

Related manuals for VT 2960

Brand: Samsung Pages: 6

Brand: 3Com Pages: 3

Brand: 3Com Pages: 2

Brand: Yeastar Technology Pages: 12

Brand: D-Link Pages: 58

Brand: Yealink Pages: 2

Brand: Yealink Pages: 2

Brand: Yealink Pages: 3

Brand: Yealink Pages: 6

T48S Skype For Business Edition

Brand: Yealink Pages: 3

Brand: Yealink Pages: 6

Brand: Yealink Pages: 4

Brand: Panasonic Pages: 68

Brand: Uniden Pages: 51

CL-2200XP ALPHA

Brand: Voyager Pages: 45

Brand: Icom Pages: 50

Brand: Plantronics Pages: 2

Brand: Geemarc Pages: 94

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands