VTech VT 2960 User Manual Download

Page: 12 / 48

The

VT 2960 is also equipped with a

detachable belt clip. Align the pins on
the inside edge of the belt clip with the
notches on the inside of the

VT 2960

Handset. The belt clip should snap
securely into place. Do not force the
connection. See illustration:

While you are reviewing CID or
MEMORY DIALING records, press and
hold this key to delete the record cur-
rently displayed. The LCD will confirm
deletion.

VOLUME CONTROL KEY
Located on the edge of the Handset
opposite the antenna, this key controls
the earpiece volume.

Press and hold the portion of the key
to raise the volume.

Press and hold the portion of the key
to lower the volume.

The Handset LCD will display the
volume level as you adjust it. One bar
indicates the minimum volume level; 4
bars indicates the maximum.

HANDSET FEATURES

PUSH THE BELT CLIP
ONTO THE HANDSET

Summary of Contents for VT 2960

















































Search results

Summary of Contents for VT 2960

Reviews:

Related manuals for VT 2960

Brands by name

Popular brands

VTech VT 2960, User Manual

Search results

Summary of Contents for VT 2960

Reviews:

Related manuals for VT 2960

Brands by name

Popular brands