44
IC (Industry Canada)
This telephone is registered for use in
Canada.
Notice: The REN/IES assigned to this
telephone determines the
number of devices you may
connect to the telephone loop
which is used by the device
to prevent overloading. The
termination on a loop may
consist of any combination of
devices subjected only to the
requirement that the sum of
the REN/IES does not exceed
five (5.0).
Notice: The Industry Canada label
identifies certified equipment.
This certification means that
the equipment meets certain
telecommunications network
protective, operationl and
safety requirements. The De-
partment does not guarantee
the equipment will operate to
user’s satisfaction.
Before installing this equipment, user’s
should ensure that it is permissible to
be connected to the facilities of the lo-
cal telecommunications company. The
equipment must also be installed using
an acceptable method of connection.
The customer should be aware that
compliance with the above conditions
may not prevent degradation of serv-
ices in some situations.
Repairs to certified equipment should be
made by an authorized Canadian main-
tenance facility designated by the supplier.
Any repairs or alterations made by the user
to this equipment, or equipment malfunc-
tions, may give the telecommunications
company cause to request the user to dis-
connect the equipment.
Users should ensure for their own
protection that the electrical ground
connections of the power utility,
telephone lines and internal metallic
water pipe system, if present, are
connected together. The precaution
may be particularly important in rural
areas.
Caution: Users should not attempt to
make such connections
themselves, but should con-
tact the appropriate electri-
cian, as appropriate.
FCC AND IC REGULATIONS
