VTech VSP735 Administrator And Provisioning Manual Download

Page: 73 / 156

VSP735 Administrator and Provisioning Manual

Servicing

Firmware Upgrade

You can update the phone with new firmware using the following methods:



Retrieving a firmware update file from a remote host computer and accessed
via a URL. This central location may be arranged by you, an authorized

ErisTerminal dealer, or your SIP service provider. Enter the URL under
Firmware Server Settings.



Using a file located on your computer or local network. No connection to the
Internet is required. Consult your dealer for access to firmware update files.
Click Manual Upgrade to view the page where you can manually upgrade the

phone’s firmware.

The firmware upgrade settings are also available as parameters in the configuration

file. See “provisioning” Module: Provisioning Settings on page 114.

Firmware Server Settings
Click the link for each setting to see the matching configuration file parameter in

Appendix A: Configuration File Settings. Default values and ranges are listed there.

Setting Description

Firmware URL

The URL where the firmware update file resides. This

should be a full path, including the filename of the
firmware file.

Server authentication name

Authentication

username

for the firmware server

Server authentication password

Authentication

password

for the firmware server

To update the firmware immediately:

Click

NOTE: You can also configure the phone to check for firmware updates at regular
intervals. See the Provisioning page.

Summary of Contents for VSP735





























































































































































Search results

Summary of Contents for VSP735

Reviews:

Related manuals for VSP735

Brands by name

Popular brands

VTech VSP735, Administrator And Provisioning Manual

Search results

Summary of Contents for VSP735

Reviews:

Related manuals for VSP735

Brands by name

Popular brands