VSP735 Administrator and Provisioning Manual
28
Using the WebUI
Network
IP:
10.88.51.133
DHCP:
Enable
Subnet Mask:
255.255.0.0
Gateway:
10.88.3.120
DNS 1:
10.88.126.31
DNS 2:
10.88.126.10
SNTP:
us.pool.ntp.org
3.
On your computer, open an Internet browser. (Depending on your browser, some
of the pages presented here may look different and have different controls.
Ensure that you are running the latest update of your preferred browser.)
4.
Type the phone IP address in the browser address bar and press ENTER on your
computer keyboard.
The browser displays a window asking for your user name and password.
5.
For the user name, enter admin. For the password, enter the default password,
admin. You can change the password later on the Servicing > Security page.
6.
Click OK.
The WebUI appears.
Click topics from the navigation bar along the top of the WebUI, and then click links
to individual pages along the left. You view and change settings in two different
types of fields: drop-down lists and entry fields into which you type information. For
your security, the WebUI times out after 10 minutes, so if it is idle for that time, you
must log in again.
The remaining procedures in this section assume that you are already logged into
the WebUI.
NOTE: The settings tables in this section contain settings that appear in the WebUI
and their equivalent settings in the configuration file template. You can use the
configuration file template to create custom configuration files. Configuration files
can be hosted on a provisioning server and used for automatically configuring
phones. For more information, see Provisioning Using Configuration Files on page 85.
Saving Your Settings
Each WebUI settings page has a
button. Click
to save any changes
you have made on the page. During a configuration session, click
before you
move on to the next WebUI page.
