VTech VSP735 Administrator And Provisioning Manual Download

Page: 23 / 156

VSP735 Administrator and Provisioning Manual

Using the Phone Menu

Cancel

Save

VLAN ID

WAN VLan:

Disabled

WAN port:

PC VLan:

Disabled

PC port:

Press



and enter the WAN port number. Use the dial pad and the

Backspc

soft

key to enter characters. The valid range is 0 to 4095.

Press



and then press





to enable or disable the PC port VLan.

Press



and enter the PC port number. Use the dial pad and the

Backspc

soft key

to enter characters. The valid range is 0 to 4095.

Press

Save

To set other settings (DNS and NTP):
1.

From the Network setting menu, press





to highlight Others, and then

press SELECT.
If DHCP is disabled, the Others menu appears. If DHCP is enabled, an error
message appears briefly before returning you to the Network setting menu.

Cancel

Save

Others

DNS 1:

0.0.0.0

Backspc

Add dot

DNS 2:

0.0.0.0

SNTP:

us.pool.ntp.org

Enter the IP address for the primary DNS server. Use the dial pad and the

Add dot

soft key to enter characters. Press





to advance to the next

character.

Press



and enter the IP address for the secondary DNS server. The deskset uses

this server if the primary server does not respond.

Press



and enter the IP address for the NTP server. If the deskset does not use

an NTP server, you must manually enter the time and date settings.

Press

Save

Summary of Contents for VSP735





























































































































































Search results

Summary of Contents for VSP735

Reviews:

Related manuals for VSP735

Brands by name

Popular brands

VTech VSP735, Administrator And Provisioning Manual

Search results

Summary of Contents for VSP735

Reviews:

Related manuals for VSP735

Brands by name

Popular brands