VTech VSP735 Administrator And Provisioning Manual Download

Page: 135 / 156

VSP735 Administrator and Provisioning Manual

135

Appendix A: Configuration File Settings

“call_settings” Module: Call Settings

The call settings configure data related to a user’s call preferences. The data is

stored internally at /mnt/flash/CallSettings.xml.
All the call settings (except one) follow the format: call_settings.account.x.[element]

where x is an account number ranging from 1 to 3.
All the call settings are included in the MAC-specific configuration file.

Setting:

call_settings.account.x.block_anonymous_enable

Description:

Enables or disables anonymous call blocking.

Values:

0 (disabled), 1 (enabled)

Default:

Setting:

call_settings.account.x.outgoing_anonymous_enable

Description:

Enables or disables outgoing anonymous calls.

Values:

0 (disabled), 1 (enabled)

Default:

Setting:

call_settings.account.x.dnd_enable

Description:

Enables or disables Do Not Disturb for account x.

Values:

0 (disabled), 1 (enabled)

Default:

Setting:

call_settings.account.x.dnd_incoming_calls

Description:

Sets whether incoming calls are shown or rejected when DND is on for
account x.

Values:

show, reject

Default:

reject

Setting:

call_settings.account.x.call_fwd_always_enable

Description:

Enables or disables Call Forward Always for account x.

Values:

0 (disabled), 1 (enabled)

Default:

Summary of Contents for VSP735





























































































































































Search results

Summary of Contents for VSP735

Reviews:

Related manuals for VSP735

Brands by name

Popular brands

VTech VSP735, Administrator And Provisioning Manual

Search results

Summary of Contents for VSP735

Reviews:

Related manuals for VSP735

Brands by name

Popular brands