VTech VSP735 Administrator And Provisioning Manual Download

Page: 30 / 156

VSP735 Administrator and Provisioning Manual

WebUI:

System

WebUI: System

SIP Account Management

On the SIP Account Management pages, you can enter the account settings for each
line you have ordered from your service provider. There is an Account settings page

for each available line.
The sip account settings are also available as parameters in the configuration file.

See “sip_account” Module: SIP Account Settings on page 94.

General Account Settings
Click the link for each setting to see the matching configuration file parameter in

Appendix A: Configuration File Settings. Default values and ranges are listed there.

Setting Description

Enable Account

Enable or disable the SIP account. Select to enable.

Display Name

Enter the name that will appear on the phone LCD when

account x is selected. The display name is also the text
portion of the caller ID that is displayed for outgoing calls

using account x.

User identifier

Enter the User identifier supplied by your service provider.
The User ID, also known as the Account ID, is used for SIP

registration.
NOTE: Do not enter the host name (e.g.
“@sipservice.com”) as part of the User identifier. The

WebUI automatically adds the default host name.

Summary of Contents for VSP735





























































































































































Search results

Summary of Contents for VSP735

Reviews:

Related manuals for VSP735

Brands by name

Popular brands

VTech VSP735, Administrator And Provisioning Manual

Search results

Summary of Contents for VSP735

Reviews:

Related manuals for VSP735

Brands by name

Popular brands