VSP735 Administrator and Provisioning Manual
22
Using the Phone Menu
DHCP
Set static IP
VLAN ID
Others (DNS and NTP servers).
To enable or disable DHCP:
1.
From the Network setting menu, press
or
to highlight DHCP, and then press
SELECT.
2.
Press
or
to select Enabled or Disabled, and then press
Save
.
DHCP is enabled by default, which means the deskset will get its IP address from the
network. When DHCP is disabled, you must enter a static IP address for the deskset.
NOTE: You must be familiar with TCP/IP principles and protocols to configure static
IP settings.
To set static IP for the deskset:
1.
From the Network setting menu, press
or
to highlight Set static IP, and
then press SELECT.
If DHCP is disabled, the Set static IP menu appears. If DHCP is enabled, an
error message appears briefly before returning you to the Network setting menu.
2.
On the Set static IP menu, enter the static IP address. Use the dial pad and the
Add dot
soft key to enter characters. Press
or
to advance to the next
character.
Cancel
Save
Set static IP
IP:
0.0.0.0
Backspc
Add dot
Subnet Mask:
0.0.0.0
Gateway:
0.0.0.0
3.
Press
and enter the Subnet Mask. Use the dial pad and the
Add dot
soft key to
enter characters. Press
or
to advance to the next character.
4.
Press
and enter the Gateway. Use the dial pad and the
Add dot
soft key to
enter characters. Press
or
to advance to the next character.
5.
Press
Save
.
To set the VLAN ID for the deskset:
1.
From the Network setting menu, press
or
to highlight VLAN ID, and then
press SELECT.
2.
On the VLAN ID menu, press
or
to enable or disable the WAN VLan.
