18
ET605 User Manual
Setting up the Phone
6.
Enter the registrar and save with
.
7.
If required, enter the password received from your Internet service provider or administrator and press
.
After successful registration you will see the phone symbol and the registered account (identity) in the
identity line underneath the date/time bar:
Note:
If you see the account on the display preceded by
or
X
and the phone is not working,
the server may be down, either for servicing or due to a malfunction. The registration and
initialization should be completed as soon as the server is up and running again. You may want to
check with your administrator or your provider if nothing happens within a reasonable amount
of time.
What to do if initialization and registration are unsuccessful
Your network or your VoIP provider may require more login data than requested by the VTech phone during
the initialization and registration process. This data is entered on the web interface of the phone. Contact your
network system administrator or your VoIP provider for more information.
1.
When you have received all necessary data, open the phone’s web interface. See "Opening the web
interface" on page 35
for more information.
2.
Open Identity 1 and enter any additional login information you have received from your provider. See
"Identities/accounts" on page 69 for more information.
Note:
A number of IP telephony service providers and a number of SIP PBXs require settings
that are different from VTech’s standard factory settings. Do not change the standard
configuration unless you know what you are doing. Expert help may be required.
Infobar with date& tim
e
Identity line
