VTech Eris Terminal VSP715A Page 4 User Manual Download

Page: 4 / 74

Important Safety Information

This symbol is to alert you to important operating or servicing

instructions that may appear in this user’s manual. Always follow basic

safety precautions when using this product to reduce the risk of injury,

fire, or electric shock.

Important safety instructions

When using your telephone equipment, basic safety precautions should always be

followed to reduce the risk of fire, electric shock and injury, including the following:

This product should be installed by a qualified technician.

2. This product should only be connected to the host equipment and never

directly to the network such as Public Switch Telephone Network (PSTN) or

Plain Old Telephone Services (POTS).

3.  Read and understand all instructions.
4.  Follow all warnings and instructions marked on the product.
5.  Unplug this product from the wall outlet before cleaning. Do not use liquid or

aerosol cleaners. Use a damp cloth for cleaning.

6. Do not use this product near water such as near a bath tub, wash bowl,

kitchen sink, laundry tub or swimming pool, or in a wet basement or shower.

7. Do not place this product on an unstable table, shelf, stand or other unstable

surfaces.

8. Slots and openings in the back or bottom of the telephone base and handset

are provided for ventilation. To protect them from overheating, these

openings must not be blocked by placing the product on a soft surface such

as a bed, sofa or rug. This product should never be placed near or over a

radiator or heat register. This product should not be placed in any area where

proper ventilation is not provided.

9. This product should be operated only from the type of power source indicated

on the marking label. If you are not sure of the type of power supplied at the

premises, consult your dealer or local power company.

10. Do not allow anything to rest on the power cord. Do not install this product

where the cord may be walked on.

11. Never push objects of any kind into this product through the slots in the

telephone base or handset because they may touch dangerous voltage

points or create a short circuit. Never spill liquid of any kind on the product.

12. To reduce the risk of electric shock, do not disassemble this product, but

take it to an authorized service facility. Opening or removing parts of the

Summary of Contents for Eris Terminal VSP715A











































































Search results

Summary of Contents for Eris Terminal VSP715A

Reviews:

Related manuals for Eris Terminal VSP715A

Brands by name

Popular brands

VTech Eris Terminal VSP715A, User Manual

Search results

Summary of Contents for Eris Terminal VSP715A

Reviews:

Related manuals for Eris Terminal VSP715A

Brands by name

Popular brands