manualshive.com logo in svg

VTech Eris Terminal VSP715A, User Manual

Share
Download
VTech Eris Terminal VSP715A User Manual Download Page 15

15

Deskset Installation

Overview

This section assumes that your network infrastructure is established and that 

your IP PBX service has been ordered and configured for your location.

Install the phone close to a router or network switch. You can power the phone 

using a compatible VTech power adapter or Power over Ethernet (PoE—Class 

1). If you are not using PoE, install the phone near a power outlet not controlled 

by a wall switch. The phone can be placed on a flat surface or vertically mounted 

on the wall.
For customer service or product information, please contact your distributor or 

dealer.

Network requirements

A switched network topology is recommended for your LAN (using standard 

10/100 Ethernet switches that carry traffic at a nominal rate of 100 Mbit/s).
The office LAN infrastructure should use Cat.-5/Cat.-5e cable.

The LAN connections to the deskset(s) should all be wired. However, wireless 

connections to other devices (such as laptops) in your office will not impede 

performance.

All desksets must reside on a single subnet. A Dynamic Host Configuration 

Protocol (DHCP) server is recommended and must be on the same subnet as 

the desksets so that IP addresses can be auto-assigned. In most cases, your 

network router will have a DHCP server. By default, the deskset has DHCP 

enabled for automatic IP address assignment.

Note

: Some DHCP servers have default settings that limit the number of network 

IP addresses assigned to devices on the network. You should log in to your 

server to confirm that the IP range is sufficient.

If no DHCP server is present, you can assign static IPs to desksets. You can 

assign a static IP address using the deskset menus. Go to 

Admin settings > 

Network setting > Set static IP

. See the Administrator and Provisioning Guide 

for more information. If you do not have a DHCP server or do not manually 

assign static IPs, you will not be able to access the WebUI and/or enable 

automatic time updates from an NTP server.
A DNS server is recommended to resolve the path to the Internet and to a server 

for firmware and configuration updates. If necessary, the system administrator 

can also download upgrade files and use the WebUI to update the deskset 

firmware and/or configuration settings manually.

For users whose computers require a GigE Ethernet frame rate (a gigabit per 

second), use separate Ethernet connections for the deskset and the computer. 

The Ethernet connection through a deskset is limited to 100 Mbits/s.

Summary of Contents for Eris Terminal VSP715A











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands