VTech 5145 User Manual Download Page 72

Page: 72 / 128

www.vtechphones.com

Telephone operation

Receiving a CELL call while on a HOME call

Whle on a

HOME

call and there s an ncomng

CELL

call,

CELL

and

status con wll

flash on the handset and telephone base display, and you will hear a short beep.
To answer the ncomng

CELL

call:

Press

CELL

on the handset or telephone base.

- The

HOME

call wll automatcally be placed on hold and

Home call on hold

wll appear on

the dsplay.

To end the

CELL

call:

Press

OFF/CANCEL

on the handset or

CELL

on the telephone base.

- The

HOME

lne wll stll be on hold.

To resume the

HOME

call on hold:

Press

HOME

on the handset or telephone base.

Receiving a HOME call while on a CELL call

If you are on a

CELL

call and there s an ncomng

HOME

call,

HOME

and the

status con wll

flash on the handset and the telephone base display and you will hear a short beep.
To answer the ncomng

HOME

call:

Press

HOME

on the handset or telephone base.

- The

CELL

lne call wll automatcally be placed on hold and

Cell call on hold

wll appear on

the dsplay.
To end the

HOME

call:

Press

OFF/CANCEL

on the handset or

HOME

on the telephone base.

- The

CELL

lne wll stll be on hold.

To resume the

CELL

call on hold:

Press

CELL

on the handset or telephone base.

•

If you have voce

mal servce

actve on your cell

phone, and you

do not answer the

ncomng

CELL

call, the call wll

be answered by

your cell phone's

voce mal. Contact

your cell servce

provder for more

nformaton about

voce mal servce.
If the answerng

system s on and

you do not answer

an ncomng

HOME

call whle

on the

CELL

lne,

the ncomng

HOME

lne call

wll be answered

by the answerng

system.

•

Summary of Contents for 5145

































































































































Search results

Summary of Contents for 5145

Reviews:

Related manuals for 5145

Brands by name

Popular brands

VTech 5145, User Manual

Search results

Summary of Contents for 5145

Reviews:

Related manuals for 5145

Brands by name

Popular brands