VTech 5145 User Manual Download Page 25

Page: 25 / 128

www.vtechphones.com

eto

Setting up headset

Before you begn, make sure that your Bluetooth enabled headset s not

connected to any other Bluetooth devce. Refer to your headset user's

manual to determne the headset's PIN and how to set your headset n

dscoverable mode.
To par and connect a headset:
1. Usng the telephone base, press the

MENU

softkey whle n dle mode.

2. Press the

and

DOWN

NavKeys to hghlght

Bluetooth

, then press

the

SELECT

softkey to enter the

Bluetooth

menu.

3. Press the

SELECT

softkey to enter the

Set up Headset

menu.

• If a devce s already connected to the telephone base, press the

softkey to temporarly dsconnect the devce(s) and contnue

the parng process.

4. Usng your headset, set your headset n dscoverable mode.
5. Usng the telephone base, press the

NEXT

softkey on the telephone

base to search for your headset.

6. Once the telephone base finds your headset, select it and press the

PAIR

softkey. If the telephone base cannot find your headset, press

the

FIND

softkey to search agan, and make sure that your headset s

n dscoverable mode.

7. Enter the PIN of your headset, then press the

DONE

softkey on the

telephone base (for most headsets, the PIN s

0000

If you have

any devce(s)

connected to the

telephone base

when parng,

Connected

devices will

be temporarily

disconnected

wll appear on

the dsplay.

•

Bluetooth

Man Menu
Voce Mal

Intercom

Bluetooth

SELECT

Bluetooth

Set up Cellular

Set up Headset

Actve Devces

SELECT

Set your Headset n

Dscoverable mode,

then press NEXT

Set up Headset

Enter PIN:

0000

Set up Headset

DONE

HELP

ERASE

Mary’s Headset

Headsets Found

FIND

PAIR

INFO

Summary of Contents for 5145

































































































































Search results

Summary of Contents for 5145

Reviews:

Related manuals for 5145

Brands by name

Popular brands

VTech 5145, User Manual

Search results

Summary of Contents for 5145

Reviews:

Related manuals for 5145

Brands by name

Popular brands