VTech 5145 User Manual Download Page 51

Page: 51 / 128

www.vtechphones.com

etu

To restore all codes to the default settings:

1. Press the

MENU

softkey when n dle mode to enter the man menu.

2. Press the

and

DOWN

NavKeys to select

Settings

, then press the

SELECT

softkey to enter the

Settings

menu.

3. Press the

and

DOWN

NavKeys to hghlght

Voice Mail Codes

, then

press the

SELECT

softkey.

4. Press the

and

DOWN

NavKeys to hghlght

Reset All Codes

, then

press the

SELECT

softkey.

5. Press the

YES

softkey to save the settng.

Default settings (restore settings)

You can restore the default settngs of the telephone base f desred.

Restorng the default settng only affects the telephone base.
To restore default settngs:
1. Press the

MENU

softkey when n dle mode to enter the man menu.

2. Press the

and

DOWN

NavKeys to select

Settings

, then press the

SELECT

softkey to enter the

Settings

menu.

3. Press the

and

DOWN

NavKeys to hghlght

Default Settings

, then

press

SELECT

. The screen wll dsplay

Restore Default Settings?

4. Press the

YES

softkey to restore the telephone base default settngs. A

confirmation tone will sound and the screen will show

[ Default settings

restored ]

System setup

Restorng the

telephone base

default settngs

does not clear the

phone book, call

log, answerng

system messages,

actve devces,

pared devces,

redal lst, or reset

the tme.

•

Settngs

Clear Voce Mal

Voce Mal Codes

Default Settngs

SELECT

Default Settngs

YES

Restore Default

Settngs?

Reset All Codes

YES

Restore All Voce

Mal Codes?

Summary of Contents for 5145

































































































































Search results

Summary of Contents for 5145

Reviews:

Brands by name

Popular brands

VTech 5145, User Manual

Search results

Summary of Contents for 5145

Reviews:

Brands by name

Popular brands