VTech 5145 User Manual Download Page 38

Page: 38 / 128

www.vtechphones.com

System setup

Default settings (restore settings)

You can restore the default settngs for all handset settngs. Restorng the

default settngs for a handset only affects that handset.
To restore the default settngs:

Press

MENU/SEL

when n dle mode to enter the man menu.

Press the

and

DOWN

NavKeys to select

Settings

, then press

MENU/SEL

to enter the

Settings

menu.

Press the

and

DOWN

NavKeys to hghlght

Default Settings

, then

press

MENU/SEL

. The screen wll dsplay

Restore Default Settings?

Press the

YES

softkey.

Deleting registration

Deletng a handset regstraton only deletes the regstraton on that handset.

Deletng a handset regstraton s only necessary f you are replacng your

telephone base. To delete all the handsets from the telephone base, see

page 48.
To delete the regstraton on the handset:
1. Press

MENU/SEL

when n dle mode to enter the man menu.

2. Press the

and

DOWN

NavKeys to select

Settings

, then press

MENU/SEL

to enter the

Settings

menu.

3. Press the

and

DOWN

NavKeys to hghlght

Delete Registration

then press

MENU/SEL

. The screen wll dsplay

Delete Handset

Registration?

4. Press the

YES

softkey.

1.
2.

Restorng the

handset default

settngs does not

clear the redal lst,

phone book, call

log, messages, or

reset the tme or

handset name.
After deletng

the handset

regstraton, the

handset wll reset

and dsplay

Place

in Charger

. To

regster a handset,

see page 7.

•

Restore

Default Settngs?

Default Settngs

YES

Settngs

Keypad Tone
Language
LCD Contrast
Clear Voce Mal

Default Settngs

Settngs

Language
LCD Contrast
Clear Voce Mal
Default Settngs

Delete Regstraton

Delete Handset

Regstraton?

Delete Regstraton

YES

Summary of Contents for 5145

































































































































Search results

Summary of Contents for 5145

Reviews:

Related manuals for 5145

Brands by name

Popular brands

VTech 5145, User Manual

Search results

Summary of Contents for 5145

Reviews:

Related manuals for 5145

Brands by name

Popular brands