www.vtdrive.com
17
FP
This code is used
to set
the” rated
current-of Motor”
Rated
value
“The rated current of motor”
is the same as the current nominal
current of motor
FU
This code is used
to set
the “motor
under-load
protection”
Prohibition
Set the detailed in Item 5.5
Note:
●
F7 the "Max working current”, is basic on the nominal current of motor.
●
If you have no any operation for 2 Minutes after you come into the "set" state,
you will return from "set" state.
●
You can not set any parameters in the process of starting or stopping.
●
If you press the "Yes" key to open the soft starter, you can make the set
parameters recovery to Ex-factory values.
5.3 The function of "Programmable relay output"
This function has two kinds of operation way, those are Programmable time
sequence output and output and Programmable state output.
●
When the FJ is set as 0-4(or 10-14), the programmable operation way is time
sequence output,
As the following form:
