www.vtdrive.com
12
●
Open state: you should not press the "run" key until the ready-lamp lights and
show “READY"
●
Time-delay state: When the ready-lamp or fault-lamp is shining, it means it is
interval time delay; and when the Display screen shows "dEXXX", means staring
time-delay.
●
The "Run" or "Stop" key: In the process of staring, the panel shows "XXXX" that
is the value of start-up current .At this time only "Stop" key is in use. And the
lamps of ready, run and fault are all dark, and you can not come into the "set" and
"help menu" state. While, in the process of stopping, the panel shows "XXXX" that
is the value of start-up current. At this time, only "Run" key is in use, and the
lamps of ready, run and fault are all dark, and you can not come into the "set" and
"help menu” state.
●
The "Set" key: Press "Set" key to come into the Set Menu and now the panel is
showing FX: XXX. Please press "Set" key again and Colon is shining, then you
can change the Parameters under the Colon you need If you want to keep the
Parameters changed, Please press "Yes" key, and if you do nor want, please
pressing the "Set" key until the Colon stops shining, then the Parameters are
former .Having finished the above operation, please press the "Yes" key to return
or "Stop" key to return directly
●
The "Yes" key: Press the "Yes" key directly; you will come into Help Menu and
the panel shows HX: XXX. When you finish reading the Help Menu, you can press
this key again or "Stop" key to return. This key not only can be used to keep the
Parameters when you set the parameters you need, but also be sued as
"Returning".
