22
VTC ProControl Software (Windows XP)
PC Control Software
The DLMS4080 is shipped with a special visual processor control (Windows XP) PC Graphic User Interface (GUI)
application - VTC ProControl Software. The VTC ProControl application gives the user the option to control the unit from a
remote Windows XP PC through the USB, RS-232 or Ethernet communication links. The VTC ProControl GUI application
makes it much easier to control (and monitor) the DLMS4080, allowing the user to get the whole picture on one screen.
Programs can be recalled and stored from/to PC’s hard drive, thus expanding the storage to become virtually limitless.
Line Array EL210, ELS212
The software loaded into the VTC DSP processor is optimized for the EL210 in the 2-way mode, and for the EL210
and ELS212 in the 3-way mode. Minor frequency response equalization and system gain adjustments for array
configurations, and venue acoustics should only occur in the processor input section.
Parameter Values
Attempting to change any of the channel output settings could damage the
loudspeaker drivers.
The output limiter settings provide a compromise between the maximum allowable acoustic output and minimal
loudspeaker driver failures. These settings will reduce the possibility of damage to the loudspeaker drivers, but will
not eliminate failures if driven excessively hard.
Additional loudspeaker driver protection is achieved by reducing the limiter threshold level in the
input section of the processor.
Gain
Input
Delay
PEQ+GEQ
IIR
Crossover
Compressor
Mute
Gain
Mixer
Delay
PEQ+GEQ
IIR
Crossover
Limiter
Mute
Output
