10
Output Menus
When an Output Channel, or channels are selected for modification (see
Channel Selection and Linking for
Programming)
the Output menu parameters can be accessed by pressing the
Menu
push-button to advance from
the
SIGNAL Menu
to the
EQ Menu
and finally the
XOver Menu
. (Use the
Menu
push-button to go backward
from the
XOver Menu
to
EQ Menu
then finally the
SIGNAL Menu
). Use the Data wheel to change the parameter’s
settings.
1. Signal Menu
Output channel signal menus can be chosen by pressing the
Cursor
push-button to advance from
LEVEL
to
POL
and finally to
DELAY
. (Use the
Cursor
push-button to go backward from
DELAY
to
POL
then to
LEVEL
). Use
the Data wheel to change the parameter’s settings.
LEVEL
– Gain, -40.00dB to +15.00dB in 0.25dB steps.
POL
– Polarity, can be normal (+) or inverted (-).
DELAY
– Delay settings are displayed in ms, ft or m. The time unit of the delay can be changed in the
System menu. The maximum delay permitted is 4,800 steps (100ms).
LEVEL:0.00dB
O1:______ Signal
POL:+
O1:______ Signal
DELAY:000.000ms
O1:______ Signal
Cursor
Cursor
Menu
