13
3. CROSSOVER (XOver)
Crossover parameters can be set by pressing the
Cursor
push-button to advance from
TYPL
to
FRQL
,
SLPL
,
TYPH
,
FRQH
and finally to
SLPH
. (Use the
Cursor
push-button to go backward from
SLPH
to
FRQH
,
TYPH
,
SLPL
,
FRQL
, then to
TYPL
). Use the Data wheel to change the parameter’s settings.
TYPL
– Filter Type of low frequency crossover point (high pass). Types can be Butterworth,
Linkwitz-Riley or Bessel.
FRQL
– Filter cut-off Frequency of low frequency crossover point (high pass). The cut-off frequency
ranges from 20 to 20,000Hz in either 1 Hz steps or 1/36 octave steps. The frequency steps can be
set in the System Menu.
SLPL
– Filter Slope of low frequency crossover point (high pass). Ranges from 6 to 48 dB/octave. If the
selected Filter Type is Linkwitz Riley, the available slopes are 6 /12 / 24 / 36 / 48 dB/octave.
TYPL:Off
O1:______ XOver
TYPL:Butterworth
O1:______ XOver
TYPL:Link-Riley
O1:______ XOver
TYPL:Bessel
O1:______ XOver
FRQL:1000Hz
O1:______ XOver
SLPL:24dB
O1:______ XOver
Cursor
Cursor
Menu
Data
