16
6. Name
All output channels can be named to help identify the channel or function. The output channel Name can be set
by pressing the
Cursor
push-button to advance to the next character. (Use the
Cursor
push-button to go
backwards). The Data wheel changes the individual characters.
NAME
– Channel name. 6 characters in length.
System Menus
The System menu allows system-level settings. This menu allows modifications to parameters that are related to
system behavior and general operation of the
DLMS4080
. The System menu can be accessed by pressing the
Enter/Sys
key on the menu keypad (when no Input/Output or other System Menu is activated).
Note: All System Menus require the
Enter/Sys
key to be pressed for the selected
action to be activated.
1. Recall Menu –
Program memory bank recall
The
DLMS4080
has a built in non-volatile memory that can store up to 30 different program setups. A program
previously saved to memory can be recalled using this menu.
PROG
– Program Number to be recalled. Use the Data Wheel to advance to the next program, press
Enter
twice to confirm selection.
2. Store Menu –
Program memory bank
The
DLMS4080
has built-in non-volatile memory that can store up to 30 different program setups. The
current programs settings can be stored using this menu. The old program with the same program number
will be overwritten. Once the program is stored in the flash memory, it can be recalled at a later time, even
after powering down or power failure.
PROG
– Program Number for the current data to be stored.
NAM
– Program Name, allows a maximum length of 12 characters.
NAME:______
O1:______ Name
P:1 ____________
SYSTEM Recall
P:1 ____________
SYSTEM Store
NAM:____________
SYSTEM Store
Cursor
Menu
Menu
Menu
Data
