ECU converter PBS Version: 1.3
Page 21/43
The T18MZ has the ability to rename the sensors:
2.4.3
Turbinestatus – numerical "Current"-Values
The turbines status messages are displayed
numerically as current values.
Please refer to the table on the left.
As "Error" and thus current value "-10.0A"
all
others
errors, not listed in the table are
interpreted messages, which are errors that can
lead to a shutdown of the turbine or not even
allow it to start.
If an alarm of MINUS 5.0A is programmed in
the transmitter, all error messages of the turbine
are signaled as a current alarm in the
transmitter.
2.4.4
Telemetry Box
On the Telemetry Box, the data of the
ECU converter can also be displayed (in
the picture e.g. fuel consumption 1560ml)
and alarms corresponding section 2.4.5.3
are generated:
STATUS, BATT, FUEL und RPM
With the latest software (V1.003 - as of
May 2015) the sensors
SBS-01V and
SBS-01T
are not supported yet
.
Caution:
The VSpeak ECU converter sends its data
always
taking advantage of all sensors
, including
the sensors 1 x SBS-01V and 2 x SBS-01T. These occupy the slots in accordance with the table
in section 2.4.2 - or the last saved values.
PBS
Turbine Status
CUR-F1678
CURRENT
STOP
0.0 A
COOL
10.0 A
Th : I d l e
20.0 A
Th : -Re l
30.0 A
TEST
40.0 A
F IRE
50.0 A
START
60.0 A
I DLE
70.0 A
LOCK
- 1.0 A
Error
- 10.0 A
