manualshive.com logo in svg

VRmagic Eyesi Slit Lamp, Installation And Operating Manual, Page: 6 / 64

Share
Download
VRmagic Eyesi Slit Lamp Installation And Operating Manual Download Page 6

1  General Information

This guide describes the assembly, disassembly, and basic operation of the simula-
tor, as far as relevant for the safe and error-free operation of the product. This guide 
does not describe the simulator software or any issues related to the software.

1.1  Further Documentation

 

Â

For information on the administrator interface of the simulator software, please 
refer to the separate administrator guide.

 

Â

For information on the user interface of the simulator software, please refer to 
the separate user guide.

1.2  Symbols Used in this Document

 DANGER 

Indicates a hazardous situation which, if not avoided, will result in death or seri-
ous injury.

 WARNING 

Indicates a hazardous situation which, if not avoided, could result in death or 
serious injury.

 CAUTION 

Indicates a hazardous situation which, if not avoided, could result in minor or 
moderate injury.

NOTICE 

Indicates practices not related to personal injury, but possibly related to prop-
erty damage, malfunction, or data loss.

Info 

Provides helpful information related to the current topic.

Eyesi Slit Lamp Simulator – Installation and Operating Guide

6

General Information

Summary of Contents for Eyesi Slit Lamp

































































Reviews:

No comments