manualshive.com logo in svg

VRmagic Eyesi Slit Lamp, Installation And Operating Manual, Page: 2 / 64

Share
Download
VRmagic Eyesi Slit Lamp Installation And Operating Manual Download Page 2

Eyesi Slit Lamp – Operating Guide

Original instructions 
Document version: 1.3 
Date of issue: August 27, 2020 
Applicable to: Eyesi Slit Lamp simulator platform 1.0

Subject to change without notice. Errors excepted.

This document is protected by copyright. All rights reserved. No part of this docu-
ment may be reproduced or transmitted for any purpose in any form or by any 
means, electronically or mechanically, without expressly written permission by 
VRmagic.

Eyesi

®

 is a registered trademark of VRmagic GmbH.

If you have any questions regarding the use of the device that are not answered in 
the product documentation, please contact

VRmagic GmbH 

Turley-Str. 20 
68167 Mannheim 
Germany

Tel. 

+49 621 400 416 0 

Fax 

+49 621 400 416 99

[email protected] 
www.vmagic.com

In case of a service request please visit 

http://service.vrmagic.com

 

or send an e-mail to 

[email protected].

Summary of Contents for Eyesi Slit Lamp

































































Reviews:

No comments