VRmagic Eyesi Slit Lamp, Installation And Operating Manual, Page: 10 / 64

The simulator PC generates heat during operation. Overheating can cause tempo-
rary malfunction or permanent damage to the simulator. To avoid overheating:
• Make sure that the operating environment is well ventilated.
• Do not block the air vents of the simulator PC.
• Do not allow dust to build up on the air vents.
• Set up the simulator PC at least 10 cm (4”) away from walls or other objects
which may block ventilation.
• Do not place the simulator PC on a carpet or rug with long fibers.
• Do not place the simulator PC in a narrow or cramped space.
• Do not cover the simulator PC during operation.
2.8 Assembly and Connection to a Power Supply
The simulator must be set up according to relevant electrical regulations. Assemble
and connect the device in accordance to the electrical and mechanical requirements
specified in the provided guides. Assemble the device in the way and order de-
scribed in the provided guides.
Assembly
The simulator is heavy. Trying to move or to lift the simulator on your own could
cause injury or damage to the simulator. Assembly must be carried out by two
people.
Condensed moisture from the air might cause damage to the simulator. If the simu-
lator components are very cold from transporting, let them warm up at room tem-
perature before assembly and operation. Only switch on the simulator if the simula-
tor and room temperature are between 10–30 °C (50–86 °F).
Make sure that the simulator table stands safely on all four swivel casters. After
positioning the simulator in its working position, lock all four wheels so that the
simulator cannot move while using it.
Position cables so that they cannot be damaged (e.g. rolling chairs, kinking) and
so that accidents (e.g. tripping) cannot occur. Lead cables directly to the simulator.
Secure cables with cable protectors. Wind up and fasten cables using zip ties, if the
cables are too long.
Connection to a power supply
When setting up the simulator, follow the instructions of other devices you are con-
necting to it (e.g. storage devices). Those instructions may contain important safety
measures and information regarding permitted application of the devices.
Only use the supplied power cable to connect the simulator to the mains power sup-
ply. If the supplied power cable is damaged, contact VRmagic to order a new one.
Eyesi Slit Lamp Simulator – Installation and Operating Guide
10
Safety