VRmagic Eyesi Slit Lamp, Installation And Operating Manual, Page: 12 / 64

Operating table
Contusions or other injuries may occur if body parts get caught between the mov-
ing parts of the simulator while adjusting the table height. As far as possible, keep
hands, fingers, and other body parts away from the lifting column and the operating
table while adjusting the table height. Keep a safety distance of the simulator to
neighboring objects of minimum 15 cm (6”).
When adjusting the operating table height, the moving parts of the simulator may
touch and damage other objects in the room. Before adjusting the table height,
make sure that the table’s vertical motion is not obstructed by other objects.
Do not place any objects on the operating table that do not belong to the simulator.
Especially heavy objects may exceed the operating table’s load bearing capacity.
Never lean against or sit on the operating table.
Touch screen
The screen’s touch-sensitive surface might be damaged by wrong handling. Never
touch the screen with hard or sharp-edged objects (e.g. a ball-point pen). Do not
press hard on the screen. Only tap the screen with your fingers using slight pressure.
Microscope
If the bayonet lock of the microscope is opened, the complete eyepiece unit will
come off. If it falls down, it may cause personal injury or damage. Do not open the
bayonet lock.
If you strongly pull the eyepieces towards you, the eyepieces will come off. If they
fall down, they will possibly get damaged. Do not pull strongly on the eyepieces.
2.10 Disassembly, Transport, and Storage
Disassembly
Before starting to disassemble the simulator, switch off the simulator. Also discon-
nect the simulator from power.
Some plugs of the simulator have locking mechanisms that prevent them from be-
ing unplugged accidentally. Trying to remove the plugs without unlocking them may
cause damage to the plugs or the simulator PC connectors. Make sure to unlock the
plugs while unplugging them.
If the bayonet lock of the microscope is opened, the eyepieces can fall off and
cause injury or get damaged. We recommend keeping the bayonet lock closed
at all times, also during disassembly. If it should become necessary to open the
bayonet lock, for example in a service case, make sure to hold the eyepieces firmly
so they cannot fall down.
Eyesi Slit Lamp Simulator – Installation and Operating Guide
12
Safety