4
ENGLISH
BioniCare
®
Knee System
General Operating Instructions
This section describes the operation of the BioniCare Knee System for the
treatment of osteoarthritis of the knee. Each patient should read and become
completely familiar with the written operating instructions. Special attention
should be given to the sections on “Contraindications” and “Cautions”.
Charging the Battery for the BioniCare Generator:
The BioniCare Generator is powered by a single rechargeable Lithium Ion
battery. The battery charger can be used at 110 or 220 volts and fully charges
the battery in four hours. Use only the charger supplied by VQ OrthoCare as
improper charging can cause heat damage or even high pressure rupture.
Do not use any battery that shows any signs of corrosion, leaking or other
damage. Replace corroded, leaking or damaged batteries.
Preparation:
Prior to applying electrodes to the skin, the skin must be washed with soap and
water and completely dried. Electrodes are held in place by the BioniCare Wrap.
To prepare your brace or BioniCare Wrap for application and use, please refer
to the application instructions that were supplied with your BioniCare Knee
System. You may request a copy of the application instructions by contacting
our Patient Services Center toll-free at 800.444.1456 or by visiting our website
at www.bionicare.com.
Preparation and Treatment
System Components
(1) BioniCare Wrap
(1) Knee Wrap*
(1) Thigh Liner*
(1) Knee Electrode
(1) Thigh Electrode
(1) BioniCare Generator
(BIO 2000)
(1) Lead Wire
(1) Battery Charger
(1) Bluetooth Dongle
(optional)
(2) Rechargeable Batteries
Lead Wire
BioniCare Wrap
Knee Electrode
Thigh Electrode
BioniCare
Generator
Bluetooth
Dongle*
Rechargeable
Battery
Knee Wrap*
Thigh Liner*
Catalyst-Propel OA
OActive 2
OActive 2
Catalyst-Propel OA
*optional
