VTAC USER MANUAL
VPC
10/10/2022
For more information visit vpc.com
5
Figure D.
Rear view (Wire exit side)
INDICATES 5
POSITIONS
Figure C.
Side view
FRONT
MATING
SIDE
REAR
WIRING
SIDE
Figure B.
Front view (ITA mating side)
ALPHA KEYING
RECEPTACLE
NUMERIC
KEYING
RECEPTACLE
TOP
BOTTOM
POLARIZING
FEATURE
BLACK
MARKING-
POS A1
INDICATOR
TIER B
TIER A
LATCHING
FEATURE
Figure A.
Front view
1.
The front side of the i2 MX Receiver can be determined by locating the keying
receptacles. The numeric keying receptacle should be located at the top and the alpha
keying receptacle at the bottom of the front
(
Figure B
)
. The front, also has a polarizing
feature which prevents incorrect engagement with the ITA
(
Figure B
)
. Finally, the front
features a latch for secure mating with the ITA (
Figure A
).
2.
Position A1 is located on the front by a cavity marked in black in the top left corner
(
Figure B
).
An additional Position A1 indicator can be found in the bottom tier of
slots (Tier B), in the top left corner. The cavities are used to place pins from the VTAC
Extraction Tool.
3.
The rear side can be identified by the marking closest to the edge from the side view
(
Figure B
). The rear side is where wire exits the receiver.
4.
Blue and white markings along the slot edges denote slot (insert) count. Each blue or
white marked area indicate 5 slot positions. (
Figure C
).
I2 MX FEATURE IDENTIFICATION- RECEIVER
PART # 310 130 113, 310 130 114
